extruded solid sheet

GB PLAS provide Polycarbonate (PC) solid sheets which manufactured by the extrusion technology. The superior characteristics provide an opportunity for design freedom and make it an ideal choice for variety applications.

Product features

• Light weight and easy
• Excellent light transmittance up to 90-92% (Depends on thickness).
• Heat and sound insulation
• Weather resistance and protection from UV radiations. It will not turn yellow after sun exposure and suitable for outdoor usage
• High resistant to impact or fracture and virtually unbreakable
• Easy fabrication and excellent thermoforming capabilities
• Available in a variety of colours

Applications

• For decoration, corridors & pavillions in gardens, recreational & residential places
• For interior & exterior decorations of commercial & public buildings
• Stadiums, Gymnasiums & sport clubs
• Skylight for living rooms, swimming pools, agriculture greenhouse & sheds
• Wind shields of motorcycles and helmet
• Sound insulation shields on express way & etc.
• For instruments, panels & military industry
• Roofing for industry building

Specifications:

Thickness (+/- 5%) : 1.0mm – 30.00mm Width: 1.22m – 2.1m

Length:
Sheet (2.44m / 8ft)
Roll (30.5m / 100ft)
Or any specific length

• Non-standard product (width, length, thickness, colour) are available subject to a minimum order quantity
• Thickness tolerance : subject to thickness tolerance
• Colour or custom colour

Installation & Storage Method 

Make sure the support structure is clean and dry. Do not directly screw the sheet, only use aluminium clapping for joining. Must leave a gal of at least 50mm in between sheets for thermal expansion and contraction. A minimum slope of 5º roof pitch is recommended to allow adequate rain water run-off.

Use only new or sharp ground steel or carbide tipped drills. All holes must be drilled at least 40mm from the edge of the sheet. All holes must be at least 4mm bigger than screw for thermal expansion and contraction.

GB BOND® Polycarbonate Solid Sheet can be cold-form by : –

* a/b >= 2
* Ø < 90˚
* R >= 180t

Recommended Installation Method

Important Guidelines

For maintenance and storage guidelines

DOWNLOAD PDF (CATALOG) -> EXTRUDED SOLID SHEET – PC DATA SHEET

Acrylic (AV/PMMA) is a plastic material which exhibits glass-like quality but only half of the weight. GB PLAS Acrylic (AV/PMMA) solid sheets are manufactured by using our sophisticated extrusion technology. We provide Acrylic products with outstanding durability and quality which suitable for a wide range of application.

Product features

• Tough and durable plastic for replacing glass and polycarbonate (PC) when extreme strength is not essential
• Scratch resistance and pleasing surface appearance
• Resistant to inorganic acids.
• Good weather resistance and does not turn yellowish over a period of time. Suitable for outdoor usage.
• High clarity and light transmittance up to 93%.
• Easy fabricated and excellent thermoforming capabilities
• Available in a variety of colours

Applications

• Appliances
• Electrical/ Electronic Applications
• Optical Applications
• Automotive Applications
• Advertising Signage
• Display Unit
• Light Boxes

Specifications:

Thickness (+/- 0.2mm) : 1.0mm – 30.00mm Maximum Width: 2100mm (2.1m)

Length: No Limit (Sheet/ Roll Form) Colour: Colour or custom colour

Standard Length: 1.22m x 1.83m / 1.22m x 2.44m

DOWNLOAD PDF (CATALOG) -> EXTRUDED SOLID SHEET – ACRYLIC DATA SHEET

SMMA (Methyl Methacrylate Styrene)/MS is formed by blending of Styrene Monomer (SM) and Methyl Methacrylate (MMA). It has better mechanical properties and cost effectiveness is some of the factors that drive the market demand of SMMA/MS. GB PLAS provide SMMA/MS plastics sheets in wide range of colours to fulfill customer increasing needs.

Product Features

• Good chemical resistance
• Good weatherability
• High clarity and good light transmittance of 92%.
• Good level of hardness and suitable for outdoor usage
• Pleasing Surface It has good scratch resistance but less than glass.

Applications

• Appliances
• Electronic or Electronic Applications
• Optical Applications
• Automotive Applications
• Advertising or Signage
• Decorations or Display Unit
• Light Boxes

Specifications:

Thickness (+/- 0.2mm) : 1.0mm – 30.00mm Maximum Width: 2100mm (2.1m)

Length: No Limit (Sheet/ Roll Form) Colour: Colour or custom colour

Standard Length: 1.22m x 1.83m / 1.22m x 2.44m

DOWNLOAD PDF (CATALOG) -> EXTRUDED SOLID SHEET – SMMA SHEET DATA SHEET

Polystyrene (PS) is one of the oldest thermoplastic polymer and it is non-crystalline thermoplastic resin. It can be divided into General Purpose Polystyrene (GPPS) and High Impact Polystyrene (HIPS). HIPS can be produced by adding the polybutyl rubber particles.

Product Features

• Light Weight and Easy Handling
• High GPPS is naturally transparent and widely used in a number of consumer products applications.
• Rigid
• Low Density

Applications

• Shower Screen (Pattern: Fine Matte)
• Signage (Pattern: Rain Drop, Star Drop, Tree Bark, Train Rail)
• Lighting Equipment (Pattern: Prismatic # 12 & # 15)

Specifications:

Thickness (+/- 0.2mm) : 1.0mm – 30.00mm Maximum Width: 2100mm (2.1m)

Length: No Limit (Follow customer needs) Colour: Colour or custom colour

Standard Length: 1.22m x 1.83m / 1.22m x 2.44m

DOWNLOAD PDF (CATALOG) -> EXTRUDED SOLID SHEET – Polystyrene (GPPS_HIPS) DATA SHEET

PETG (Polyethylene Terephthalate Glycol) is thermoplastic polyester which provides good chemical resistance, durability and excellent formability for manufacturing. PETG is both thermo-formable and vacuum-formable.

Product Features

• Good impact resistance and able to tolerate a tremendous amount of pressure without cracking
• Suitable for food contact and commonly used for food containers and bottle for liquid beverages
• Superior chemical resistance compared with other plastics
• Outstanding thermo-forming and vacuum-forming capabilities
• Cost effective
• Sterilisable
• Easy fabricated

Applications

• Food Storage Container
• Medical Field
• Printing
• Display Unit
• Light Boxes
• Advertising Signage

Specifications:

Thickness (+/- 0.1mm) : 0.5mm to 6mm / 0.019in x 0.236in Maximum Width: 1200mm (1.22m) / 48in

Length: No Limit (follow customer needs)

Colour: Colour or custom colour

Standard Length:
1.22m x 1.83m / 1.22m x 2.44m
48 in x 72 in / 48 in x 96 in

DOWNLOAD PDF (CATALOG) -> EXTRUDED SOLID SHEET – PETG DATA SHEET

ABS stands for Acrylonitrile Butadiene Styrene. ABS is an impact-resistant engineering thermoplastic & amorphous polymer. ABS is made up of three monomers: acrylonitrile, butadiene and styrene:

• Acrylonitrile: It is a synthetic monomer produced from propylene and This component contributes to ABS chemical resistance & heat stability 
• Butadiene: It is produced as a by-product of ethylene production from steam This component delivers toughness & impact strength to ABS polymer
• Styrene: It is manufactured by dehydrogenation of ethyl benzene. It provides rigidity & processability to ABS plastic

Product features

• High rigidity
• Good impact resistance, even at low temperatures
• Good insulating properties
• Good weldability
• Good abrasion and strain resistance
• High dimensional (Mechanically strong and stable over time)
• High surface brightness and excellent surface aspect

Chemical properties

• Very good resistance to diluted acid and alkalis
• Moderate resistance to aliphatic hydrocarbons
• Poor resistance to aromatic hydrocarbons, halogenated Hydrocarbons and alcohols

Applications

• Automotive applications (Instrument panels, pillar trim, dashboard components, door liners and handles, seat back or seatbelt components, )
• Appliances (household and consumer goods)
• Electrical and electronics (Computer keyboards)
• Pipes and fittings

ABS is further used to make legos, instruments, sports equipment, gardening tools, medical applications include manufacturing nebulizers, compressors and more.

Polypropylene (PP) is a rigid and crystalline thermoplastic used widely in everyday objects like packaging trays, household products, battery cases, medical devices, etc. PP belongs to polyolefin family of polymers and is one of the top three widely used polymers today. Polypropylene has applications both as a plastic and a fiber in:

• Automotive Industry
• Industrial Applications
• Consumer Goods, and
• Furniture Market

It has the lowest density among commodity plastics.

Application

• Packaging applications
• Consumer (Furniture, housewares, toys, etc.)
• Automobile applications
• Fibers and fabrics
• Industrial applications

Polyethylene is a lightweight, durable thermoplastic with variable crystalline structure. It is one of the most widely produced plastics in the world (tens of millions of tons are produced worldwide each year). Polyethylene is used in applications ranging for films, tubes, plastic parts, laminates, etc. in several markets (packaging, automotive, electrical, etc.).

Application (HDPE)

• Packaging applications
• Consumer (Furniture, housewares, toys, etc.)
• Fibers and textiles

Application (LDPE)

• Packaging applications
• Pipes and fittings